1 / 7
Makita Track Saw Parallel Guide Extension Set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Repeatable rips with the Makita track saw
- Rating
- 5 / 5
- Likes
- 282
- Downloads
- 913
- Makes
- 2
- Views
- 7,435
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Repeatable rips with the Makita track saw
This jig makes it easy to cut precise strips of exactly the same width when panel cutting.
Two side fences are mounted on the guide rail. The required dimension is set with the adjustable stops.
- Huge time saving when cutting panel strips, as no more measuring or marking is necessary.
- For cuts wider than 300 mm
- Toolless mounting on the guide rail
Print settings:
PETG
layer height of 0.3mm should work fine
Hardware:
1x M5x30 Hex head bolt
2x M5x10 Socket head screw
3x M5 Hex nut
1x M4 Hex head bolt
1x M4 Heat-Set inserts for plastic (brass)
2x T-Track 17x10mm, ~800mm, aluminium profile
T-Track or C-Profile
(not affiliated)