Mac Keyboard Grippy Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This must be printed with supports. I used the default Cura supports, but I think I would have had an easier time had…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 0
- Views
- 488
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This must be printed with supports. I used the default Cura supports, but I think I would have had an easier time had I gone with Tree supports. When I removed the supports, I did break a couple of the mushroom tabs off by accident, but the grippies have stayed on.
I used a clamp to press them into the mould filled with silicon caulk, then left it overnight, and gave them another hour or two to stop feeling tacky.
I used 3M stickers to adhere them to the keyboard.
The slope is ~4°, the front adds ~.25" (6.35mm) in height, and the rear adds ~.5" (~12.7mm) in height.
The pictures were taken after 3-4 months of daily use.
Category: Office