Ender 5 Riser Feet 30mm PLA+TPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet for more stability and bigger space for psu fan. Made for 4040 or 4020 profile and fits to ender 5 or any similar.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 100
- Makes
- 0
- Views
- 861
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BENEFITS
- printer is more stable and less vibrations
- bigger z stepper motor or lower the motor to gain 20+mm
- more space for a bigger psu/mcu fan
- could be used with or without TPU parts
PARTS
PLA/PETG
3-4 perimeters, 20-30 infill. The heavier it is, the more stable the printer is. No supports needed if you print in current orientation (with holes on a vertical wall - see bellow).
foot_normal.stl - you can print a set of 4
foot_cables.stl - If you route your cables on back-right profile
TPU/FLEX
3-4 perimeters, 20-30 infill depends on your TPU flexibility. No supports needed if you print in current orientation (with the tip up - see bellow).
base_normal.stl - you can print a set of 4
base_cables.stl - If you route your cables on back-right profile
BOM - for one foot
- 2 x M5x20mm Hex Socket Head Screws
- 2 x M5 t-nuts
Disadvantage: you will need to relocate the display - but this could be a very fun side project :)