Ender 5 Riser Feet 30mm PLA+TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for more stability and bigger space for psu fan. Made for 4040 or 4020 profile and fits to ender 5 or any similar.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BENEFITS
- printer is more stable and less vibrations
- bigger z stepper motor or lower the motor to gain 20+mm
- more space for a bigger psu/mcu fan
- could be used with or without TPU parts
PARTS
PLA/PETG
3-4 perimeters, 20-30 infill. The heavier it is, the more stable the printer is. No supports needed if you print in current orientation (with holes on a vertical wall - see bellow).
foot_normal.stl - you can print a set of 4
foot_cables.stl - If you route your cables on back-right profile
TPU/FLEX
3-4 perimeters, 20-30 infill depends on your TPU flexibility. No supports needed if you print in current orientation (with the tip up - see bellow).
base_normal.stl - you can print a set of 4
base_cables.stl - If you route your cables on back-right profile
BOM - for one foot
- 2 x M5x20mm Hex Socket Head Screws
- 2 x M5 t-nuts
Disadvantage: you will need to relocate the display - but this could be a very fun side project :)