Solid Laptop Stand (notebook)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.19 – €5.12 net (excluding VAT)
For file: LaptopStand_Side_0.2mm_PETG_MK3SMMU2S_5h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.65 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 5.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raise your laptop/notebook approx. 12 cm on the front.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 110
- Makes
- 0
- Views
- 724
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I was looking for a laptop stand now for a while. But I didn't found the right one for my own needs. So made my own.
This one consists of 3 printed parts and 6x M3x20 screws.
The model is solid. I've decided to use honeycomb infill at 17 %, 3 perimeters, no bottom or top layers.
Print the side piece twice, back part once.