1 / 4
GEARWRENCH 20 Piece Ratcheting Wrench (35720A-02) Organizer — image 1
1 / 4

GEARWRENCH 20 Piece Ratcheting Wrench (35720A-02) Organizer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Organizer / holder for Gearwrench ratcheting wrenches. Designed to stand up or lay in any orientation. TPU required.

Rating
5 / 5
Likes
121
Downloads
341
Makes
2
Views
3,599
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This is designed to work with flexible TPU filament only. Recommend printing with 4 perimeter walls, 4 bottom and top layers, and 13% rectilinear infill. No supports required. Use a thin-tip Sharpie to darken the letters after printing. 

Due to the tolerances, the provided STLs will likely only work properly with the Gearwrench 20piece set model “35720A-02”. Might be a useful proof of concept if designing for your own set of wrenches.

Here are the Fusion360 files. The wrench head thickness and diameters are set via parameters. The models are not perfect so I apologize in advance!

Metric Fusion360: https://a360.co/3C0ni0H
SAE Fusion360: https://a360.co/3BZ657S

Video: 

 

You can confirm if the STL will work with your wrenches prior to printing by comparing measurements with this chart. Your measured wrenches should be within +-0.1mm of these values, in mm.  Otherwise they probably wont fit well. This is for the SAE wrenches.

 

 

 

 

 

 

 

 

 

 

 

 

 

Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of appreciation, I’m always happy to hear from people. But let’s be real - the most effective form of communication is cold, hard cash (or beer).

Tags