Counting matching models…
Simple latch to hold the brew group in place for Philips Saeco HD8645 Xsmall super-automatic espresso maker. The housing of the HD8645 Xsmall is fairly flexible and allows the brew group to move around enough to push the puck bin out of…
I designed these because I deal with lots of hex socket cap screws at my work and I wanted a faster way to find out the correct size without waltzing around looking for sockets around the shop. (I designed this because I didn't have any…
A simple allen key holder for multiboard . Sizes: 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32, 5/64, 1/16, .050 Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you…
Keep your 1/4 inch drive socket set neatly organized and easily accessible with this improved holder! This V2 version features chamfered bottom edges for enhanced print quality and includes 3MF files for easy multi-color printing,…
Keep your ½ inch drive socket set neatly organized and easily accessible with this improved holder! This V2 version features chamfered bottom edges for enhanced print quality and includes 3MF files for easy multi-color printing, allowing…
Keep your 3/8 inch drive socket set neatly organized and easily accessible with this improved holder! This V2 version features chamfered bottom edges for enhanced print quality and includes 3MF files for easy multi-color printing,…
After years of exposure to elements, the original plastic retainer thingy broke on mine. This may work with non-Zamp connectors, since this is just a standard SAE socket. I didn't want to replace the full plug, so this is reusing one of…
*** SEE Edit Below *** I wanted something different from designs I have seen to hold my sockets in my toolbox. So I made this slanted socket rack. It fits nicely in the shallow drawers of my toolbox. And the slanted design makes it easy…
Combine two great design in to one Now you can keep your component fixed and coffee grounds contained
Combine two great design in to one Now you can keep your component fixed and coffee grounds contained
Der Adapter passt für die genannte Ryobi RCS18X Kreissäge und wird an vier Stellen mit der Bodenplatte mit Gewindeschrauben und eingeklebten Muttern M4 verschraubt. Das Sägeergebnis ist absolut überzugend und es gehen gerade mal knapp 5…
I purchased a SuperMicro X11SAE-F from eBay that came without the io shield. I found a model for the SuperMicro X11SAE on MakerWorld and remixed it to accommodate my needs. Printed in PETG-HF with a .6mm HF nozzle.
A small screw holding for SAECO COFFEE MACHINE BLACK COUNTER PISTON BREW UNIT, part number 11003796
This is a replacement internal valve insert for the Philips Saeco LatteGo outlet nozzle . The original part is attached to a small spring inside the nozzle and controls water flow and sealing. This model replaces only the internal moving…
An efficient use of gridfinity space holding both a metric and SAE 3/8 drive hex socket set. Size 6U 2x3 box modified to with 2 hinges that can hold any 3/8 drive sockets. Each hinge has a hole for a 6x3mm magnet for helping hold the…
This funnel fits inside the coffee bean storage section of a Philips superautomatic coffee maker. The funnel bypasses the pile of coffee beans fed to the grinder, allowing you to add small amounts of other ingredients (such as compatible…
No major changes from the original model. If you have the SAE set as well, this should complete your organizer needs!
crows foot holder, a bit crude, but I have used it to hold my set in place for a few years now.
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
For the Saeco coffee machine, there is an option on the left side to dispense hot water. However, the water stream is so powerful that it causes splashing. For this reason, I have designed a pressure reducer. This part fits over the…
Insert for Milwaukee Packout 48-22-8435 Recommend printing in red ASA or other robust plastic, I used 0.2mm layer height with 3 wall loops, alternate extra wall, 7% honeycomb infill. I had to slice it to fit on my Bambu X1C 256mm print…
Gridfinity 1/4 inch drive socket holders in standard and metric.
Gridfinity socket holder for 1/2 inch drive sockets in both metric and standard.
Craftsman SAE sockets ¼ through 15/16 standard and deep Craftsman Metric sockets 7-19, 21 standard and deep
The original water handle in Saeco coffee machines is always a pain in the neck. It's too fragile and won't last long unfortunately. As mine was broken, I've created the replacement spare part that fits the tank and is much more durable.…
Ratchet and socket set organizer. Fits craftsman, with a 120T gearwrench ratchet. No supports, 10% infill.
I designed a replacement water valve piston for Gaggia coffe maker water tank. The original part broken, but the coffee maker still functioning.
An icosahedron with an inscribed hexagon.
I remade this for a Dewalt (DWMT73804) socket set. Also, used 3D printed lettering as well as threaded inserts to attach it to the wood.
Made for: https://www.harborfreight.com/38-in-drive-sae-professional-shallow-socket-set-12-piece-58103.html Will fit the tall set as well. Model has the sizes as a separate object if you have a multi color printer. You can also remove…
Für meine Saeco Excelsis Suprema eine Bohnentankerweiterung PLA+ 0,2mm 80mm/sek Hypercube Oben abgedichtet durch Orioginalgummi durch den Deckel. Unten eine schicht Lebensmittelechtes Silikon .Die Ecke ausgefüllt das eine Art Oring…
I've wanted a set of nut drivers for a long time and never seemed to get around to actually buying them until recently. I was at Harbor Freight and happened to see these sets for $10 each (Metric and SAE). I bought both but when I got…
Custom adjustable holder for Saeshin Strong 210 spindle. Both pieces need support for printing. Nozzle 0.4mm layer 0.2mm Infill 100%. The older version breaks in some situations so I've added an M4x17mm flat head screw and m4 nut to…
SAE-Port with cabel set, to plug in to the attachment point for the recovery eye The cable set, pluged into the adapter (3D print) and secured with shrink tubing: Cable set is with fuse from Amazon…
This is a Gridfinity 3X2 socket holder that holds up to 9 sockets that are approximately ¾ inch in diameter. This holder is designed to fit the Carlyle Socket Set 3/8 in SAE (1) 9 Pc Set MPN: 610219 or NAPA PN: NPT 610219…
The box that my sockets came in 20 years ago finally fell apart, so I decided to make some custom socket trays to organize and hold all my sockets. These go inside my toolbox drawers, they are not intended for wall-mounting. Size is…
This socket rail should be everything you need for an all in one handy ¼ socket rail. Recommend printing at 0.2mm layer height with support on (for underside of rail slots). Tested with PETG but PLA should work just fine. Tested with PETG…
Mini portable voltmeter for testing car and motorcycle battery voltage. built with SAE connector for an easy plug and play operation. BOM: mini voltmeter battery SAE cable SAE connector (for voltmeter)
Cracked knob is common problem for a coffeee machine, you can't ceep the original design with 3d printed one, so better to fix it. It's a tight fit model, so you might need to scale it up a bit
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
Socket holder 1-1/4 to 25/32 sae The socket holder uses a gridfinity 2x5 bin. It's made for sae sockets 1-¼, 1-3/16, 1-1/8, 1-1/16, 1", 15/16, 7/8, 13/16 and 25/32 (Biltema). Used with 1/2" drive ratchet. Print “standing” with 10%…
Socket holder ½ to ¾ sae The socket holder uses a gridfinity 2x4 bin. Its made for sae sockets ½, 15/32, 7/16, 3/8, 5/16, 9/16, 19/32, 5/8, 21/32, 11/16 and 3/4. Used with 1/2" drive ratchet. Print “standing” with 10% gyroid/grid infill…
Uses the the Slicer embossing to add your owen markings for a fun d20 dice. Or just admire the geometry of the Icosahedron
Socket holder 9/16 - 3/4 sae, 3/8" drive ratchet. The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 9/16, 19/32, 5/8, 11/16 and 3/4. Print with 10% gyroid/grid infill and no support. You can hang it on a peg board or…
Socket holder 5/32 - 1/2 sae, 1/4" drive ratchet The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 5/32, 3/16, 7/32, 1/4 9/32, 5/16, 1/32, 3/8, 13/32, 7/16 and 1/2. Print “standing” with 10% gyroid/grid infill and no…
The milk frother head of the Saeco coffee machine kept coming off and wouldn't stay in place, so I had to hold it while frothing. This solved the problem. Made a V2 version with better fit and design - if you want download the _v2 STL file.
A 3x6x4 Gridfinity bin to hold the wrenches from the 7 piece wrench ratcheting set from Husky
A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard
Gridfinity - Craftsman Midget Wrenches 942319 - SAE
Spare inlay instead of the old filter, you have to cut a natural sponge that fits inside the inlay - did work fine - my vaccum have now more power :) Original measurements! you have to adjust the shrinkage.
Not much to say except that I couldn't find a model that sated my Gridfinity needs in my toolbox. It was a snug fit but then I increased the hole sizes very moderately. It's pretty sweet, but also incredibly rudimentary. Thank you for…
Крышка бойлера черная P0049 Saeco Talea Giro Black cover for vain boiler P0049 Saeco Talea Giro
Simple latch to hold the brew group in place for Philips Saeco HD8645 Xsmall super-automatic espresso maker. The housing of the HD8645 Xsmall is fairly flexible and allows the brew group to move around enough to push the puck bin out of…
This is a holder for metric and SAE Allen heads with ¼'' hex shanks for the following sizes. Metric: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0mm SAE: 5/64'', 3/32'', 1/8'', 5/32'', 3/16'', 7/32'', 5/16'' Recommended print settings for PLA layer…
Description This is a remix of the Metric Tap and Die Set Pegboard Peggit Mount but adapted to hold the Milwaukee SAE Tap and Die 17 Piece Set. Printing Instructions Can be printed upside down in PLA, with no supports. Recommend using a…
Craftsman Comfort Grip Nutdriver Next - SAE & Metric
Gridfinity Bin for 3/8 SAE 6 Point Craftsman Sockets. I wanted the sockets to all be at the same height. I painted the size with a sharpie. Simple, cheap, effective. I got a nice quality print in PLA with: .2 Layer 4 Walls 15% Infill
Snap-On SAE socket holder PLA. Made it practically the same as my metric one except the label. Holds many brands of sockets but was made for Snap-On's. pretty well the same as metric but with different label.
This tool is for our FRC Robotics Team 7272 - Envirobots in NYC. We use #10-32 bolts for our robot. Sorting through older parts bins, we need a faster way to get organized and assess our inventory. This was made in Onshape to help our…
Really that simple. Bolt holes are 3mm modeled, drill them out to appropriate size for your application (5mm threads in the case of most generic senders). Use as a template to make your cuts. Conforms to SAE 5 bolt pattern. OD is the OD…
1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets. 3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are…
Hi, this is a replacement part for the Phillips Seaco Xsmall coffee maker. This is part 11005727, and is the tray for putting your cup on. It is already pre-sized, in mm, so you don't have to resize it. Tips: 100% Infill Fast printing is…
Ersatz für einen Milchbehälter Deckel von einem Saeko Milchbehälter. Replacement for a milk container lid from a Saeko milk container. Category: Replacement Parts
Gasket between brew chamber and output spout after ball valve. Dimensions 8x11.75 inner/outer diameter, 1mm thickness. Print TPU 100% infill. Added second version with more clearance as original was too tight a fit.
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Some cable management clamps I made for a project Sizes are in decimal inches (As you can stick fractions in a file name) I also have metric models as well that may be worth a look so that you can get the best fit, as you may have ¾"…
Created for shock testing for the MSU SAE BAJA Racing team Single slide-on model and two-piece clam shell model (two piece is more complete) for measuring the travel Model for String Potentiometer SP1-12…
I designed these because I deal with lots of hex socket cap screws at my work and I wanted a faster way to find out the correct size without waltzing around looking for sockets around the shop. (I designed this because I didn't have any…
A simple allen key holder for multiboard . Sizes: 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32, 5/64, 1/16, .050 Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you…
I needed a compact solution for organizing my existing Husky brand metric/SAE sockets. The socket holder needed to fit within my VANQUEST EDCM-Huge 2.0 pouch . Features Separate sides for 9 metric and 9 SAE sockets Chafer corner for easy…
Print with snug supports. Use PETG for improved flexibility and liquid resistance. Should be compatible with Philips and Saeco machines: 800, 1000, 1200, 2200, 2300, 3200, 3300, 4300, 4400, 5400, 5500
As a follow-on to the original Socket2Me socket holder, this design takes a different approach and has enough room to identify socket sizes. No assembly is required as it is print in place. Printing I used an OPXL5H, .4 nozzle, .20…
Front water tray for Saeco Philips Xsmall expresso coffee machine
This adapter can be used to attach Saeco Pannarello Frother Attachment to Delonghi ECAM coffee machine.
Gridfinity Peg or Standing Metric & SAE Socket Holder - 1/2" Drive, Regular & Deep Socket Models 1 X 9 Gridfinity Footprint 2 piece version for small to regular printers 1 piece version for large format printers Metric Includes Space for:…
Do you need for a simple way to keep your wrenches together? Look no further! What's needed: Printer either or both SAE and Metric organizers Place in your 7 piece craftsman wrenches (may work with other brands if they are around the same…
I'm just organizing my tool box and wanted to share my designs. I couldn't find anything online for this set, so I made one. If you like them and they work for you, I'll be adding more as I progress through my toolbox Please checkout my…
Simply slice and print, I've printed mine out of PETG with a brim to avoid warping, but I'm sure a well-tuned printer doesn't need the brim The based box is generated via the gridfinity fusion360 plugin and I've basicallly fit the inside…
2x2x4 Gridfinity Socket Holder. Made to fit the Power Torque SAE 12 Point Swivel Socket Set Printed in Super PLA+ .15mm detail (mostly to make the text come out clean) .6 Nozzle First Layer 220/65 15% infill, but you could probably get…
2X2x4 Gridfinity Socket Holder. Made to fit the Performance Tool SAE Male Allen Socket Set Printed in Super PLA+ .15mm detail (mostly to make the text come out clean) .6 Nozzle First Layer 220/65 15% infill, but you could probably get…
Designed to be a snug fit with the lid, if it's too tight, sanding the corners of the holder down helps as that is where most of the interference is. Make sure the inside walls of the lid is free of defects. The lid model needs to flipped…
These are circle drawing templates. I made them because they contain surprisingly large circles for such a small template (2" and 50mm) and they are very compact. Have you ever used a jar lid to draw a larger circle? One template is SAE…
This is a very specific design that might not be useful to many, but I'm sharing it just-in-case. The snap-in deck plate cover for the cowl vent on my sailboat was lost on the road some time ago, and after adding a solar panel to my bow…
4X2x4 Gridfinity Socket Holder. Made to fit the Craftsman USA made ¼ drive SAE sockets Printed in Super PLA+ .30mm Detail .6 Nozzle First Layer 220/65 10% infill, but you could probably get away with 5% I've just started to prefer heavier…
8X2x4 Gridfinity Socket Holder. Made to fit the Performance Tool ½ Drive SAE impact socket set 1" thru 3/8". Both deep and shallow sockets Printed in Super PLA+ .30mm detail .6 Nozzle First Layer 220/65 10% infill, but you could probably…
3x1x4 Gridfinity Socket Holder. Made to fit the Craftsman USA made ½ Drive SAE Sockets 11/16 thru 7/16 .30mm detail .6 Nozzle First Layer 220/65 10% infill, but you could probably get away with 5%. I've just started to prefer heavier…
6x2x4 Gridfinity Socket Holder. Made to fit the Craftsman USA made 3/8 Drive SAE Sockets 13/16 thru ¼ , Including 5/8 Spark Plug Socket .30mm detail .6 Nozzle First Layer 220/65 Super PLA+ 10% infill, but you could probably get away with…
3x1x4 Gridfinity bin designed for 3/8 Drive USA Made Craftsman SAE 12PT Sockets .30mm detail .6 Nozzle First Layer 220/65 10% infill, but you could probably get away with 5%. I've just started to prefer heavier bins. I just used a paint…
Po nějaké době začala spařovací jednotka propouštět . To by nevadilo, kdyby nebylo blbě ploché a dozadu otevřené dvo přístroje za dvířky pod spař. jednotkou. Když tam něco uteče, tak to nesteče do odkapávací misky, ale vytékalo to pod…
Gridfinity compatible socket holder for Quinn 1/2in SAE impact sockets from their master impact socket set (P/N 58680). The model is too large for most printer beds. You can use your slicer to cut it into smaller sections.
