CR-10 Smart Filament Sensor Feed Guide V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some CR-10 Smarts don't come with a guide between the runout sensor and the extruder; this one's better than stock, IMO.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 93
- Makes
- 0
- Views
- 690
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a CR-10 Smart and it didn't come with a guide between the extruder motor and the filament runout sensor, so I figured I ought to make one. Has a little window cutout to see that there's filament in there; it doesn't affect feeding.
This should fit the CR-6 SE too, but I don't have one to try.
I recommend printing on its side, with the bigger hole at the bed. You might need to ream the hole out with a 2mm (or 2.5mm, depending on your tolerances) Allen key to let filament pass effectively, but once it snaps in I find that it's very reliable.
Please note: all my Printables models that are not a remix of others' work are licensed CC-BY-NC-SA. Commercial usage is available upon request; please reach out via email.