Bottom Reinforcement - 2 holes 80 mm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.27 – €0.33 net (excluding VAT)
For file: btm_reinf_holes80mm_06n_035mm_petg_mk25s_15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.30 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 15.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is my humble contribution to the Prusa Face Shield (TM) production.
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 153
- Makes
- 0
- Views
- 622
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution — Noncommercial
This is my humble contribution to the Prusa Face Shield (TM) production.
The Bottom Reinforcement, which is easier to print and assembly with 2 holes 80 mm apart. Why? Because the standard Hole Punch makes holes 80 mm apart.
Currently, the upper holes are easy to make with the hole punch, while the bottom 3 holes are not that easy.
Here is what you do:
Cut your transparent plastic 6 mm longer than needed. Punch the holes. Cut away the 6 mm strip from the bottom edge of the transparent plastic. Voila!
(Well, alternatively you can insert a 6 mm wide 'something' into your hole punch, so the bottom holes are punched exactly 6 mm from the edge, instead of the standard 12)
Included is STL file and the Fusion 360 project.
You can try, for instance, to move the holes 6 mm up - farther from the bottom line and save on cutting the bottom edge of clear plastic.
Print instructions
1) Load your favorite Prusa Face Shield project to your slicer.
2) Remove previous bottom_reinforcement instance(s)
3) Add this STL to your slicer
4) multiply the instance and layout as necessary
5) slice
6) export gcode
7) print
8) enjoy