1 / 5
Interchangeable Cake Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cake stand for a 6" cake, with ability to swap 'decor items'.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 59
- Makes
- 0
- Views
- 683
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Printed with eSun PLA+ (Black, Yellow, and Fire Engine Red),
The Stand:
Printed in 3 parts with the base and plate screwing together, and the skirt concealing the decor connectors.
- Base - printed without supports, .20 mm, 20% infill (supports may be needed depending on your printer - I'm pushing the limits with mine I think)
- Plate - printed upside-down without supports, .20 mm, 20% infill
- Skirt - printed upside-down without supports, .20 mm, 15% infill
Decor:
- Buttons: printed in two parts, buttons and posts, without supports, .20 mm, 20% infill (will be glued together)
- Buttons V2: 2 color print version to better match style of feet (black ‘outline’ on bottom, with yellow button top). Added 4-Oct-2023.
- Clips: printed on side, no supports, .20 mm, 100% infill
- Cartoon Feet: printed without supports, 20% infill, two versions:
- Joined: If you will not be using different color filaments, and/or wish to paint with no glue needed
- Separated: shoe are printed separately (handy for color change or painting), then glued to backing with legs.
- Ears: printed brim down, with supports for the ears and dome, .20 mm, 20% infill
Additional Supplies needed:
- Superglue (or your preferred glue choice for PLA) for the buttons and if using separated feet.
- File or Sandpaper (if button posts do not print cleanly)
- Resin (if you want to have a nice smooth/glossy finish or seal it after painting) - ArtResin is Certified FoodSafe (I mixed in a condiment cup, and brushed on with a disposable sponge brush using about 1/2 condiment cup worth (1 ounce total.. give or take) of 2 part mixed resin to cover feet, buttons and ears.. it doesn't take much!)
Other decor sets will eventually be created and added, by myself and hopefully others. The Stand_Connector file is up for any who wish to make their own decor items.