1 / 1
Inside Drawer Mount for Thermopen ONE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spiral vase mode cradle for the Thermopen ONE thermometer.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a quick-printing cradle for a Thermopen ONE, intended to mount inside a convenient drawer with double sided tape. It's not too tight and doesn't enclose more than necessary to make it easy to get the thermometer in and out when you need it.
The model for 0.6mm nozzle is intended to print with a 0.9mm external perimeter and at least 1.7mm of bottom layers, the 0.4mm nozzle model should use 0.6mm external perimeters and at least 1.4mm of bottom layers (or, as configured in the 0.4mm 3mf file, cut off 0.6mm or so to save print time.)