Skadis Holder: Calipers (uses heat set inserts)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Skadis holder for calipers, remixed to use heat-set inserts and printed hooks for mounting
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 161
- Makes
- 2
- Views
- 1,259
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Skadis holder for common calipers, remixed from Printuin's caliper holder in his excellent Skadis Mount Collection to use heat-set inserts for mounting instead of integrated pegs.
This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.
Required Parts
- Printed hooks
- See linked project for more details
- M2.5 heat-set inserts
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- Prusa Eshop ($11.99, 100 pcs)
- CNC Kitchen Store (€9.99, 100 pcs)
- CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
- M2.5 screws
- McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)
Printing Notes
Designed to print with the mount holes down, without any supports.
For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.
My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.