Line tamer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small cleat to stow your lines and ropes cleanly and effortlessly.
- Rating
- 4.5 / 5
- Likes
- 82
- Downloads
- 349
- Makes
- 2
- Views
- 1,489
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Description
This is a small footprint cleat that, together with a small diameter cord (1 or 2 mm), can be used to stow your ropes, halyards and other lines. Specially useful in a boat.
It's the smaller version of a widely spread commercial product from Barton.
It screws into a wall with a 4 mm (diameter) non-countersunk screw. The length of the cord to use depends on how big and long the rope you want to stow is. In my case I used around 30 to 40 mm of cord. Mileage may vary.
Recommended print settings
- layer height: 0.2 mm
- infill: anything above 15% should do
- perimeters: 3
- supports: yes, build plate only
I've uploaded a prepared .3mf file with all the settings pre-set, with already configured paint-on supports.