Line tamer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small cleat to stow your lines and ropes cleanly and effortlessly.
- Ocena
- 4,5 / 5
- Polubienia
- 82
- Pobrania
- 349
- Wydruki
- 2
- Wyświetlenia
- 1489
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Description
This is a small footprint cleat that, together with a small diameter cord (1 or 2 mm), can be used to stow your ropes, halyards and other lines. Specially useful in a boat.
It's the smaller version of a widely spread commercial product from Barton.
It screws into a wall with a 4 mm (diameter) non-countersunk screw. The length of the cord to use depends on how big and long the rope you want to stow is. In my case I used around 30 to 40 mm of cord. Mileage may vary.
Recommended print settings
- layer height: 0.2 mm
- infill: anything above 15% should do
- perimeters: 3
- supports: yes, build plate only
I've uploaded a prepared .3mf file with all the settings pre-set, with already configured paint-on supports.