Balsa Stripper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Balsa strip cutter tool. Must require for balsa model builder.
- Rating
- 4.833 / 5
- Likes
- 49
- Downloads
- 706
- Makes
- 7
- Views
- 2,782
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A must have tool for every balsa model builder.
This tool helps you cut balsa strips with precise width everytime with square cuts everytime.
Specifically designed for #11 surgical scalpel blade.
Ergonimical design for ease of use while cutting.
Hardware required:
M3x10 bolt - 2 nos
M3 nuts - 2 nos
M3 washers - 2 nos
M4x20 bolt - 1 no
M4 nut - 1 no
M4 washer - 1 no
#11 scalpel surgical blade - 1 no
Recommended slicer settigs :
Nozzle: 0.4
Material: PLA/PETG/ABS
Layer Height/Resolution : 0.2 mm
Infill: 40%
Infill pattern: Grid
Note: This tool is originally designed for a right handed person. You can mirror the models in your slicer if you prefer it left handed.