Stand with RepRapWorld's KeyPad and LCD Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So, I finally made the stand combinging RepRapworld's Keypad and LCD display at the same time. KeyPad -…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
So, I finally made the stand combinging RepRapworld's Keypad and LCD display at the same time.
KeyPad - http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
LCD - http://reprapworld.com/?products_details&products_id=179&cPath=1591_1626
I had to modify parts found here http://www.thingiverse.com/thing:21677 to fit. Even the KeyPad itself is modified, where now the buttons are inserted into the whole keypad thing.
The buttons provided here may a bit loose, but with this design, it's more flexible to just redesign the buttons, instead of having to reprint the keypad base. Only buttons needs to be reprinted, which saves a lot of time.
Instructions
Well, print seperatly or print the lcd_keypad_stand_combined.stl version if you have enough space (should fit a 200x200mm area)
For one stand you need:
1x lcd_keypad_stand_lcdpanel
1x lcd_keypad_stand_keypad
2x lcd_keypad_stand_side
9x lcd_keypad_stand_button
Screws:
12x M3 10mm to screw everything together.
4x M2.5 10mm to screw on the LCD panel.
Category: Electronics