Stand with RepRapWorld's KeyPad and LCD Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So, I finally made the stand combinging RepRapworld's Keypad and LCD display at the same time. KeyPad -…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
So, I finally made the stand combinging RepRapworld's Keypad and LCD display at the same time.
KeyPad - http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
LCD - http://reprapworld.com/?products_details&products_id=179&cPath=1591_1626
I had to modify parts found here http://www.thingiverse.com/thing:21677 to fit. Even the KeyPad itself is modified, where now the buttons are inserted into the whole keypad thing.
The buttons provided here may a bit loose, but with this design, it's more flexible to just redesign the buttons, instead of having to reprint the keypad base. Only buttons needs to be reprinted, which saves a lot of time.
Instructions
Well, print seperatly or print the lcd_keypad_stand_combined.stl version if you have enough space (should fit a 200x200mm area)
For one stand you need:
1x lcd_keypad_stand_lcdpanel
1x lcd_keypad_stand_keypad
2x lcd_keypad_stand_side
9x lcd_keypad_stand_button
Screws:
12x M3 10mm to screw everything together.
4x M2.5 10mm to screw on the LCD panel.
Category: Electronics