Ender 3v2 Bed Level Locks (w/ Handle)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This combines a bed handle with the bed level knob locks. Bed Locks are labeled for easier install... LF = Left Front…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 69
- Makes
- 0
- Views
- 847
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This combines a bed handle with the bed level knob locks.
Bed Locks are labeled for easier install...
LF = Left Front
RF = Right Front
LR = Left Rear
RR = Right Rear
Tested on Ender 3v2 but might work for Ender3/3Pro and possibly CR series.
If you only what the bed locks, you can print 2 sets of the Rear bed locks and use them as follows...
Right Rear goes on Right Rear and Left Front
Left Rear goes on Left Rear and Right Front
Next Component will include a camera mount for the bed handle.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.16
Infill:
50%
Filament: Overture PETG Black
Notes:
I used PETG for heat tolerance when printing in an enclosure.
Assembly
To Install Bed Locks...
1. Remove Bed Level Knobs 2. Fit Level Lock onto Level Bolt 3. Screw on Bed Level Knob and relevel.To Attach Bed Handle...
- Using M4 Bolts and Nuts, Mount the bed handle on top of the front bed level locks.
Category: 3D Printer Accessories