Sage/Breville precision tamper (IMS base)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A retrofit precision tamper for several Sage/Breville machines
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 29
- Makes
- 1
- Views
- 838
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Even if I didn't like the stubby design from the start on, over month of use I came to like the neat storage solution of the Sage/Breville stock tamper. Once I'd upgraded to a precision tamper base I had to model a handle to go with the original mounting location.
Compatibility
I've only tested the Dual Boiler, but as far as I know the stock tamper is the same for all Save/Breville portafilter devices. So this model is most probably compatible with all machines listed below. Please comment if you can verify.
- Dual Boiler
- Barista Touch
- Barista Pro
- Barista Express
- Duo-Temp Pro
Bill Of Materials
| 1x | DIN 603 bolt (M10 x 60mm) |
| 1x | IMS Precision Tamper Base M10 |
Remarks
Even the IMS base alone is heavier than the original tamper. The magnet in my machine is strong enough to hold it securely, but be careful.
I did not design to spec for the DIN 603 but the one I got from my local hardware store. Update the dimensions in the attached Fusion 360 file and re-export if necessary.