Window Shelf Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable shelf support that hangs from a window sash.
- Rating
- 0 / 5
- Likes
- 58
- Downloads
- 203
- Makes
- 0
- Views
- 1,264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is a pretty simple shelf support that was designed to hang from a window sash. Specifically, I wanted a place to put plants to get some indirect sun, but be out of the way.
The hex pattern is just infill and can be changed to whatever infill you prefer. I used PLA, but PETG may be appropriate if direct sun or heat is likely. I used plywood for the shelf, but acrylic or some metal might work well too. The shelf depth should be cut a little shy of 150mm (5-7/8"). The sash I designed this for is 36mm (1-7/6") thick. May need adjustment or shims for different windows.
Top and bottom layers should be set to 0. I used 8 layers for perimeter shells. My infill was hex at 5% with a 0 degree fill angle.