Window Shelf Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable shelf support that hangs from a window sash.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 1264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is a pretty simple shelf support that was designed to hang from a window sash. Specifically, I wanted a place to put plants to get some indirect sun, but be out of the way.
The hex pattern is just infill and can be changed to whatever infill you prefer. I used PLA, but PETG may be appropriate if direct sun or heat is likely. I used plywood for the shelf, but acrylic or some metal might work well too. The shelf depth should be cut a little shy of 150mm (5-7/8"). The sash I designed this for is 36mm (1-7/6") thick. May need adjustment or shims for different windows.
Top and bottom layers should be set to 0. I used 8 layers for perimeter shells. My infill was hex at 5% with a 0 degree fill angle.