1 / 6
Shoe support (wall mount)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this support to be compact and easy to print. Just print a couple of these and attach to a vertical surface…
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 176
- Makes
- 2
- Views
- 969
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I designed this support to be compact and easy to print. Just print a couple of these and attach to a vertical surface (I used double-sided sticky tape) This model should fit most shoes but some scaling might be needed depending on your needs.
F360 model: https://a360.co/2LV794c
Tips:
- If you want to use double-sided tape choose the type that is thicker and has like a soft foams core. I noticed this type of tape does not unstick after holding a lot of weight for some time.
- For heavier shoes I recommend printing in ABS or PETG due to the tendency for PLA to deform permanently after a continuous load for a long time.
Category: Household Supplies