1 / 1
Electronics Enclosure (DSO 138 + others)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Electronics enclosure for: DSO138 Oscilloscope (https://www.aliexpress.com/item/32777588244.html) LCR-T4 tester…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 778
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Electronics enclosure for:
- DSO138 Oscilloscope (https://www.aliexpress.com/item/32777588244.html)
- LCR-T4 tester (https://www.aliexpress.com/item/32680013678.html)
- PWM signal generator (https://www.aliexpress.com/item/32962154918.html)
- XR2206 signal generator (https://www.aliexpress.com/item/32781753613.html)
- LM7809 voltage regulator (https://www.aliexpress.com/item/32961984080.html)
Recommended BOM
- 4 M3 X 6 X 5.3 Embedded Nut (old link no longer works - possible substitution M3 X D5 X L6) https://www.aliexpress.com/item/4000232858343.html
- 12 M3 X 3 X 5.3 Embedded Nut https://www.aliexpress.com/item/32974153070.html
- 16 M3 Machine Screw https://www.aliexpress.com/item/32798146322.html
- Note this takes up almost the full print bed of the Ender 3 - use caution when positioning clips
- Updated 7/30/2019 to optimize switch orientation for printing
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Filament: Generic PETG Post-Printing =============
Embedded nut placement
Devices secured
- note wiring between LM7809 output and device inputs still needed. For input I've included a slot for a 5.5 X 2.1 jack to the left of the XR2206 signal generator and a small opening directly under the LM7809 (for direct wire) as two options. Note LM7809 input should be at least 12V DC - output is described as 9V max 1.2 A
7/30/2019 updated switches will need to be cut out of the cover and the ad-hoc "raft" trimmed off
Category: Electronics