ULTRA LITE FACE SHIELD 1.0 NOZZLE PRINT 83 shields per spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ULTRA LITE. DESIGNED FOR PETG 1.0 NOZZLE, 1.1 LINE WITH, .4 LAYER HEIGHT, AND NO PRINT COOLING. PRINTS 2 IN 37 MINS.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 52
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
ULTRA LITE. DESIGNED FOR PETG 1.0 NOZZLE, 1.1 LINE WITH, .4 LAYER HEIGHT, AND NO PRINT COOLING. PRINTS 2 IN 37 MINS. THIS CREATES A DUAL WALL EXTRA STRONG PRINT WITH OVER LAPPING WALLS. I'VE NOTICED THAT PETG WILL CRACK IF YOU DON'T LET IT COOL DOWN A BIT BEFORE POPPING IT OFF THE BED SO BE CAREFUL. https://youtu.be/pgLlj8a95oo
I added second shield to the upper half if you cut it twice in 1/3 down to center of the shield then fold outsides over to the middle and staple it. I makes shield rounded and protects better. this also works on bottom half but do not cut half way through.
should make 83 shields per 1kg spool of PETG