1 / 1
Prusa MK3S+ Camera Z Axis Mount Right Side
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Right side web camera mount on the Z axis motor.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 62
- Makes
- 2
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is web camera mount on the Z axis motor that's on the right side (when facing the front of the printer). It should hold any standard camera that has a ¼" screw hole mount. My remix adds a hole for a m3 nut on the opposite size of where the m3 screw insert into (touching the z motor mounts) and changes the hole a bit for easier printing.
Assembly:
- Remove the two m3 x 10mm BHCS screws on the motor mount, holding it in place while you screw in the new mount. Please mount onto the z axis motor.
- Screw in two m3 x 16mm BHCS screws to the motor mounts.
- Use either included 3d printed ¼" screw that I cobbled together (included in the model files) from two different models I found on printables in prusaslicer or your ¼" thumbscrew of choice.
- Adjust angle and elevation as needed.
Printed in standard 0.2mm speed settings in prusa slicer.