Tightener Knob for Square Jellyfish Tripod Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement tightener knob for Mini Tablet Tripod Mount by Square Jellyfish.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
10.10.22 Update: Added a second version were the nut in inserted to the print part way. This avoid any gluing and results in a clear print. It also had chambered edges to make tightening less painful.
I have used the Mini Tablet Tripod Mount from Square Jellyfish for several years and been really happy with it. Last week after a camping trip, I lost the screw knob that tightens the mount (see image below).
Went to Home Depot and picked up a couple M4-0.7mm Hex Nut for $2 and modeled a new parametric knob in OnShape based on my memory and reference pictures I found online. A small dollup of super glue to secure the nut and I'm back in business.
WARNING: If using glue, make sure to use a small amount of super glue otherwise you risk getting it in the threads of the hex nut.
Print Settings | |
|---|---|
| Printer | Prusa Mini+ |
| Brim | No |
| Supports | No |
| Nozzle | 0.6mm Brass |
| Resolution | 0.40mm DRAFT |
| Infill | 100% |
| Perimeters | 3 (for added strength) |
| Filament | Inland 1.75mm Red PLA+ |
Assembly: Materials & Tools | ||
|---|---|---|
| Hex Nut | $2 | M4 - 0.7 Stainless Steel Metric Hex Nut (2 per Pack) |
| Super Glue | $6 | Gorilla Super Glue Gel |