1 / 5
Outdoor Air Quality Monitor Base — image 1
1 / 5

Outdoor Air Quality Monitor Base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A base for an ESP32Dev, PMS5003 air quality sensor, and a DC jack in a 3" ABS pipe

Rating
0 / 5
Likes
4
Downloads
29
Makes
0
Views
593
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is base I created for my outdoor air quality monitor project. It is meant to hold an ESP32 microcontroller, Plantower PMS5003, and a DC barrel jack in the bottom of a 3" ABS pipe with a cap as a cover.

I soldered a tiny voltage regulator directly to the DC barrel jack to avoid powering both devices from the integrated regulator on the ESP32. The WiFi antenna is held up in free space for the best range, so the ESP32 goes USB-port-down.

Three notches in the bottom allow driving screws from the edge of the 3" ABS pipe to hold it in place as close to the bottom as you want.

Tags