1 / 3
Berd air mount for Seckit SK tank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d models for berd air setup
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Use 6mm ID silicone tubing
Upright model using 2.38mm Alu tubing
Horizontal model uses 4mm ALu tubing ( you can close the ends with 6-32 set screws and loctite or just Squish the ends with pliers.
Both use M3 square nuts so the height can be adjusted by a bit.
Play with the amount of holes, too many holes will give you less air pressure.