Holding Rack with M3 screws for Modular Cress/Sprout Sieve/Farm V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holding Rack with Standard M3 screws for the Modular Cress/Sprout Sieve/Farm V2 designed by NightHawk
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 162
- Makes
- 2
- Views
- 1,223
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I just wanted to have a Holding Rack for the Modular Cress/Sprout Sieve/Farm V2 with standard M3 screws. The designer NightHawk was so kind to share the step files for his connectors and spacers. In the end I designed a new stiffer rack based on his design with standard M3 screws instead of “self tapping, counter sunk screws” he used.
There are 2 files available:
1. farm_v2_rack - remix with ruthex M3.3mf - This File has a connector and a spacer with standard form ruthex m3 thread inserts which makes the whole rack very stable
2. farm_v2_rack - remix M3.3mf - This File has a connector and a spacer with normal m3 wholes. I found out that the screws have a good grip inside the filament even without the ruthex thread inserts. But after a few times of dismantling and reassembling, there could be problems because the screws have less grip over time.
You need to print 2 spacers and 4 connectors. If you want to extend your “initial” rack you need everytime additonally 2 spacer and then only 2 connectors.
Printing Instructions
- PETG, ASA or ABS recommended
- layer height 0.3mm
- No raft