Fan duct optimised
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.88 – €1.07 net (excluding VAT)
For file: ductv5_4_02mm_petg_mk3s_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
NEW VERSION https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega Its getting more and…
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 676
- Makes
- 0
- Views
- 10,322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
NEW VERSION
https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega
Its getting more and more important to do fast prints. So this CFD flow optimized duct helps. As well you get much better bridges if you have a nice cooling flow.
Fits a Anycubic i3 mega. I am working on one for my mk3s.
So i hope many people can print necessary corona stuff quicker.
The wraped horn shape pipe will dispense the air around the nozzle. The flat slots are longer at the entrance of the fan to increase resistance and they are short at the end for lower resistance - so you ensure a even flow around the nozzle.
I did a lot of iterations to get this printed easily. But now you need only support from build plate and the complete inner contour stays free of supports.
Feel free to adapt to any kind of printer - only the connection needs to be changed.
Print instructions
i used PETG because of the higher max temperature.
Prints with supports from buildplate only
enable detect bridges.