Rotation Scale for FRA400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rotation scale for an ASKAR FRA400 telescope.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 180 degree Rotation scale for the ASKAR FRA400 telescope, though it might (should?) work on any of the ASKAR scopes with a 78mm drawtube.
Major divisions at 30 degree, minor at 5 degrees.
Line up the centre division with your rotation locking thumbscrew, the rotation scale will allow you to align + or - 90 degree's from centre.
You will need an M3 heat insert to melt into the split ring at the bottom, and use a short M3 bolt for tightening and positioning the ring for your setup/needs.
I've printed this in PLA+ with a as it was the only black filament I had on hand. I used a white paint pen to mark the divisions.