1 / 3
Smallest possible ESP32-CAM (Taller remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed version of "Smallest possible ESP32-CAM" by MagnusT, with height adjusted for other variant of the ESP CAM board
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 236
- Makes
- 1
- Views
- 1,522
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Remixed version of "Smallest possible ESP32-CAM" by MagnusT, with height adjusted for other variant of the ESP CAM board. The z-height of the case has been modified to almost 17mm to fit an ESP module with regular height pins with the longer part of the rods on the “chip side” of the board. In my case, the board with pins has approx. 11mm of height flat.
Parameters:
- Material: PLA
- 10% lightning fill
- No supports necessary