Holder for A2 Whiteboard (42 x 30cm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder for a A3 whiteboard.
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 1
- Views
- 288
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a holder for a A3 whiteboard.
It's designed to fit this exactly:
https://www.amazon.co.uk/gp/product/B01AG0Y7OS
There are two main legs, which are handed. Other plastic parts needed are two hexagonal and two shaped nuts.
Finally, you'll need a 300mm long M12 threaded stud bar.
No metal nuts are required.
There are two holes to store the marker pens.
Print instructions
Print Settings
Printer brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament_brand:
Amazon Basics
Filament_color:
Yellow
Filament_material:
PETG
Notes:
Up the bed temperature to 95degC to stop the large parts warping.
Post-Printing
Assembly instructions
To assemble: 1) Take the M12 stud and screw the hexagonal nuts to approx 35mm from the end. 2) Fully Screw the threaded stud into the RH leg. 3) Slot the LH leg over the threaded rods. There should be approximately 5mm of thread showing. 4) Spin the shaped nuts on to the end, until they are flush with the end of the threaded bar and their orientation matches the feature in the leg. 5) Push back the leg on to the shaped nuts, then spin the hexagonal lock-nuts to lock the leg into place.