Hydor prime 10 hose connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple permanent fix for my aquarium filter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
I had some trouble with my Hydor Prime 10 aquarium filter.
The threaded connector between the filter body and the hose valves broke after a couple of months.
So I came up with my own design.
This could be a difficult print so I suggest you to use these parameters:
~ Layer height: 0.15 or thinner (I went with 0.08)...the reason being that the thread is a custom one and it has obscene overhangs
~ Orientation: upside down, meaning that the threaded part should be on the top
~ Supports: absolutely yes, but only from buildplate
~ Infill: 100%
~ Material: mine are PLA but I would suggest PETG
Three years later update: Just noticed a small crack in one of the connectors. I think it's safe to say these connectors are pretty good