Small Filament Spool for Samples and Leftovers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Perfect size, easy print and assembly for all those sample filaments and ends from almost empty full size spools.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 185
- Makes
- 1
- Views
- 826
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
If you find this thing useful, please consider sending a tip. :)
https://paypal.me/cdsmakestuff
https://www.venmo.com/u/cdsmakestuff
Did you come home from ERRF with a boat load of samples too? Don't want to wind them onto full size empty spools?
Here's just the ticket… sized to fit those sample rolls very nicely, or even the leftovers from full size spools.
Size: 150mm OD x 43mm wide.
Simple two part design is held together with three M3 screws.
Pre-made hole in one half
Easy printing with no supports or overhangs.
Hardware Required:
M3 x 30mm (min.) flat head screws (40mm max) - x3
Printed in PLA+, 3 walls, 4 top/bottom layers, 20% infill