Extrusion Prototyping Mounts for 3-Inch Arcade Buttons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Various prints to Mount 3-inch buttons (1-inch mounting hole) to 2020 Extrusion for prototyping Arcade Control layouts
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- GNU General Public License v3.0
Here are a collection of Button mounts I use in the Arcade Prototype Controller. They are designed for use with 3-inch Arcade Buttons which have a 1-inch mounting hole.
Included are three different types:
Double Extrusion Mount- This type gets mounted on opposing sides of the button and are T-Nutted straight down into the extrusion. This is in theory the most stable model and can also be mounted at an angle by connecting to two extrusions placed at a right angle to each other.
Single Extrusion Mount- Both this model and its thin-wall variant mount half-over a single extrusion. The mount is T-Nutted to the side of the extrusion opposite the microswitch (the “back” side).
Thin Wall Single Extrusion Mount- After trying out the first two styles, I suspected that the cone shape of the Mount provided a lot of strength to the model, so I decided to try it with thin walls. After a good bit of (ab)use I have come to the conclusion that the Thin-Wall version is plenty sturdy and generally would recommend printing this version over the thicker one.