1 / 3
Tool to cut sheetmetal by a defined thickness - suitable for Makita grinder diameter 125mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To shorten a sheetmetal part with a constant distance, I have designed this tool for a Makita angle grinder (⌀125mm).
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 61
- Makes
- 0
- Views
- 870
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Parts are printed with ASA and need partially supports.
Assembly instruction:
- Connect the plate to the angle grinder using cylinder screws M8x15 (2x) and washers for M8 (2x).
- Add hexagon nuts M4 (2x) to the plate
- Assemble torque support to the housing of the angle grinder using a cylinder screw M4x30 (1x) and a hexagon nut M4 (1x).
- Connect plate and torque support using hexagon nuts M4x25 (2x) and washers for M4 (2x).
- Check distance between plate and cutting wheel and adjust if needed to ensure constant distance.
- Tighten screws.
Disclaimer: The tool is not checked against legal safety rules. Use of the tool is on your own risk.