1 / 7
EDC Micro Tools II (Magnetizer, Demagnetizer, Brush, File)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Micro Tools. Magnetizer, Demagnetizer, Brush, File. EDC Micro Series. Compatible with each other.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 69
- Makes
- 0
- Views
- 1,426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — NoDerivatives
EDC Micro Series. Compatible with each other.
See also:
- EDC Micro Knife - Keychain (Scalpel)
- EDC Micro Pill Capsule - Keychain
- EDC Micro Screwdriver
- EDC Micro Tools I
- EDC Series Box
- Continuation of the series. EDC Micro.
- The same capsule or twice as long.
Micro tools included
- Magnetizer - Diameter 5 mm, thickness min 2.50 mm. Turn the polarity correctly.
- Demagnetizer - Diameter 5 mm, thickness min 2.50 mm. Turn the polarity correctly.
- Brush - I used the bristles of a toothbrush. Taken out with forceps and put on glue
- File - Use a strip of sandpaper 60X 4 mm and glue.
Properties
- The most important property. The cover remains on the paracord after unscrewing it.
- Small, comfortable grip.
- Hex Shank Dia: 7.00mm, not for a screwdriver bit.
- Only 12.5mm in diameter.
- Length 53mm.
- Long version 93mm
- 4mm paracord hole.
- Right-hand thread. M11.
- Long version for a better hold
Version
- E - With an EXTENSION from the cover
- L - LONG capsule
- H - HOLE version, extension + hole in grip
- No support. PLA 5g.
- Grip: Grip down printing recommended.
- Cover: Print hole down.