Improved Drawer Rail Guide/Retainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace your broken drawer guides with this improved version.
- Rating
- 4.5 / 5
- Likes
- 23
- Downloads
- 128
- Makes
- 2
- Views
- 514
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
If you find this thing useful, please consider sending a tip. :)
https://paypal.me/cdsmakestuff
The common plastic drawer rail guides are junk… never had a piece of furniture that at least one didn't break.
Replace them with an improved version.
The opening that goes over the rail on this version is 30mm wide x 7mm tall.
Most drawers use (roughly) ½" (12mm) boards for the sides/back… a #6 x ¾" (19mm) is the best size for installing these.
You will need to mark and (pre)drill new holes for the replacement screws.
Printed in PLA+, 4 walls, 6 top/bottom layers, 20% triangles infill