1 / 4
Nutcracker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is model of simple nutcracker.
To make part stronger I recomended to use 3 perimeters and 5 top and bottoms solid layers and at least 70% of infill.
Holes for M4 screws in lever should be tapped M4 thread.
Hardware needed.
-1x M6x60mm Socket Head Screw
-1x M6 Nylon Lock Nut
-2x Washer for M6 screw
-2x M4x16 or M4x20 Socket Head Screw
Material recomended: PET-G or stronger
Layer high: 0,3
Support needed
Infill at least 70%