MMU2S Single Filament Guide Festo M5 Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You have MMU2s, but want an easy way to do single color prints without worry about the buffer, filament winders,…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 1
- Views
- 1,536
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
You have MMU2s, but want an easy way to do single color prints without worry about the buffer, filament winders, table-top spool holders, etc. Now, you can re-use stock Prusa MK3s spool holder with your MMU2s for single color prints.
To use this filament guide, you just need an M5 coupler like comes with the MMU2s. I used the one that goes on to the MMU2s selector, and instead used a printed coupler there created by 78zeros:
https://www.prusaprinters.org/prints/20319-mmu2-selector-plate-with-integrated-tapered-thread
Then you may attach this filament guide to the stock prusa MK3s top-mounted spool holder, and connect a PTFE tube from it to the back of the MMU2s. I use the "Extruder 1" tube. And then if I want to print a multicolor print I can still have the other 4 tubes for up to 4 colors. Or easily detach the PTFE tube from this guide for up to 5 colors on the other spool holders. Easy, quick.
See photos for how I have this set up. Feel free to remix it to make it better. STEP file included.
Print instructions
I recommend printing this at 0.15mm layer height, 0% infill, and 6 perimeters on 0.40mm nozzle.