2.5" SSD and USB Adapter Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder that keeps a 2.5" SSD and its associated USB adapter stable and safe.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 84
- Makes
- 0
- Views
- 801
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit a standard 2.5" HDD/SSD and a StarTech.com USB3S2SAT3CB SATA to USB 3.0 adapter. The design uses a spring and a small ridge near the USB adapter to hold the HDD and keep the USB adapter plug secure to the HDD. Install the HDD together with the USB adapter by compressing the spring with the end of the HDD and them allowing it to drop under the ridge near the adapter connector. Removal is the reverse. Be sure to hold the adapter firmly and straight to the HDD during installation/removal.
Printed with MK3S+, PETG, 0.6mm nozzle, and 0.3mm layer height. Use a #2x5/16" flat head Phillips 82 degree screw to secure the spring to the case. This screw is available from Amazon: https://www.amazon.com/gp/product/B00GIC05MM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1