1 / 3
End stop for 12.7 mm / 0.5 inch diameter rod, e.g. metal band saw GFW4013
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This end stop is for use on a 12.7 mm / 0.5 inch diameter rod. A second hole can be used with a 5 mm rod.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This end stop was made as a replacement for the broken end stop of my Paulimot GFW4013 metal band saw. It slides on a 12.7 mm / 0.5 inch rod and can be clamped with the original quick release.
It is designed with a second clamping hole with a diameter of 5 mm. This hole is not only included for stress-relief purposes but also for the possibility to clamp a second rod of this diameter.
Print Settings:
- Filament: PETG
- Infill: 25 % Gyroid (this much is probably not needed)
- Layer Height : 0.3 mm
- 2 Walls (perimeters), 4 Top, 3 Bottom