1 / 3
End stop for 12.7 mm / 0.5 inch diameter rod, e.g. metal band saw GFW4013 — zdjęcie 1
1 / 3

End stop for 12.7 mm / 0.5 inch diameter rod, e.g. metal band saw GFW4013

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This end stop is for use on a 12.7 mm / 0.5 inch diameter rod. A second hole can be used with a 5 mm rod.

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This end stop was made as a replacement for the broken end stop of my Paulimot GFW4013 metal band saw. It slides on a 12.7 mm / 0.5 inch rod and can be clamped with the original quick release.

It is designed with a second clamping hole with a diameter of 5 mm. This hole is not only included for stress-relief purposes but also for the possibility to clamp a second rod of this diameter.

 

Print Settings:

  • Filament: PETG
  • Infill: 25 % Gyroid (this much is probably not needed)
  • Layer Height : 0.3 mm
  • 2 Walls (perimeters), 4 Top, 3 Bottom

Tagi