1 / 2
12mm LED Strip Bracket - verschraubbar / screwable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This LED Bracket holds a 12mm strip flat on the wall. I used 3,5 x 16mm SPAX PH2 screws to hold it in place on a…
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 104
- Makes
- 4
- Views
- 320
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This LED Bracket holds a 12mm strip flat on the wall.
I used 3,5 x 16mm SPAX PH2 screws to hold it in place on a wodden ceiling.
Evenb with PLA you can screw them pretty tight to the wall.
Print Settings
Printer:
Anycubic Kobra
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2mm
Infill:
25% Gyroid
Filament:
Anycubic PLA
Grey
Notes:
Bridging should be turned on.
I used 8 Lines of Brim for the Adhesion.
I printed it with 50mm/s and sliced it with cura.
Post-Printing
Category: DIY