1 / 2
Prusa MINI 1/4-20 Webcam Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and dirty way to mount a 1/4-20 compatible webcam (Logitech C930 in my case) to your Prusa MINI.
- Rating
- 4.5 / 5
- Likes
- 50
- Downloads
- 344
- Makes
- 5
- Views
- 4,124
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A quick and dirty way to mount a 1/4-20 compatible webcam (Logitech C930 in my case) to your Prusa MINI.
Print instructions
Printed in PETG @ 0.2mm layer height.
You'll need:
- 1/4-20 x 3/4" bolt to mount the camera to the arm.
- M3x10mm + washer to replace the M3x8mm you remove from the bed plate.
Remove the M3x8mm from the bottom of the Y axis plate. Slip the camera arm over the Y axis plate (lifting slightly on the bed for clearance. Once in place, the M3 standoff from the bed should slot into the camera arm. Just replace the M3x8mm bolt with a Mx10mm + washer to secure.