Ryobi(and other) Blower/Trimmer Carburetor Adjustment Knobs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are knobs to slip on to the low and high fuel adjustment knobs to Ryobi(and others) Carburetor. I used a Ryobi…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 61
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
These are knobs to slip on to the low and high fuel adjustment knobs to Ryobi(and others) Carburetor. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you see fit. I reccomend a 0.4mm nozzle as the shank thickness is 0.4mm. The knob is chamfered on the key side so you can see the index of the adjustment. I recommend marking this part of the knob with a Sharpie or similar. I also have a tool for adjusting the carburetor available here: https://www.thingiverse.com/thing:5574224
https://www.printables.com/model/298927
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament: 3D Fuel Pro PLA PLA+
Notes:
I had the best luck printing with the business end up, to prevent elephants foot interference on the toolhead, but had success printing in either orientation on a PEI build plate.
Category: Parts