1 / 5
Go-pro mount for drone QAV 250 Frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redrawn to fit my QAV 250 frame and with slightly larger mount-holes to avoid drilling out after print.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 166
- Makes
- 0
- Views
- 623
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
To fit my drone's frame I had to extend the rear holes 0.9cm further back. I redrew the part based on Frugols design to extend it. I also changed the width of the three mount-extrusions to 2.8mm, 3mm, 2.8mm, as the official go-pro mount I had uses.
Mount holes slightly widen to not require drilling them out.
Printed in PETG at 0.2mm with 100% infill.