autococker pre 2k pump kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this a basic 3d printed pump kit for pre 2k autocokers
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 60
- Makes
- 0
- Views
- 819
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this a basic 3d printed pump kit for pre 2k autocockers
you will need a 3/8-24 screw to replace the banjo and thread tape it
for the pump arm its easier if you use a extra one and you will need a 6-32 by 3 ½ inch screw
and for the pump rods you will need some ¼-20 screw by at least 3 inches could be longer as you need to cut down the head as the pump handle will slide on the rods
this is a work in progress it still missing a way attach the 6-32 screw to the handle , i used a screw but yould 3d print something or use epoxy
use petg asa or something strong and heat resistant