cooling ducts for BMG/Left SV01/03 upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete part cooling and heatbreak cooling solution for a BMG/Left upgrade of SV01 or SV03 (Sovol). Total weight of…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Complete part cooling and heatbreak cooling solution for a BMG/Left upgrade of SV01 or SV03 (Sovol). Total weight of the printed parts is 30 grams or less.
All fans are 4020: two blowers and one axial.
These are an adaptation for the BMG extruder of the following original designs for part cooling fan ducts:
- https://www.printables.com/model/158922-the-no-strings-part-cooling-fan-duct-for-sovol-sv0
- https://www.printables.com/model/158915-2nd-part-cooling-fan-for-sv01-by-sovol-3d-rev5
Rev b has beefier vent holes.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15-100%
Filament: any PETG any
Notes:
Print in the orientation shown in the screenshots. Supports are built-in where needed, no additional supports are necessary.
Category: 3D Printer Accessories